Description:
This is a programmer expansion shield that allows your for Arduino board to
modify the fuse bits and burn bootloader into external chip and other for
Arduino boards.
On-board buzzer and LED indicators, indicating whether the burning is
successful, it is convenient for Arduino board designers to batch burning.
Features:
Compatibility: As it uses SPI pins of ICSP interface, compatible with for
Arduino R3 / for Arduino Mega2560, can change to the bootloader burner when it
is directly plugged onto the two boards.
Operating voltage: 5V
Operating current: 500mA (max)
for Arduino board to be burned: support for Arduino R3 / Mega2560 / Nano / pro
mini (5V 16M)
On-board buzzer, if the fuse bit is successfully modified, it will sound once,
and then if burning bootloader is OK, it will sound once again. If it is not two
beeps, burning is failed. You can capture the sound instead of LED lights, so
this will improve the efficiency of burning.
On-board LED indicators, HEART BEAT led lights up like a breathing light when
powered normally. During programming, the PROG indicator flashes until it
finishes. If the programming is unsuccessful, the ERROR indicator (red) will
light.
Onboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning
Onboard ISP_6PIN interface, for the external for Arduino board bootloader
burning
On-board ISP_10PIN interface
On-board FT232RL and CH340G USB to TTL programmer interface for uploading code
to the chip on the 28P locking seat.
شیلد پروگرامر AVR -ISP مخصوص آردوینو UNO
- تولید کننده: China - A
- دسته بندی ها:
- - ماژول و شیلد های آردوینو
- کد محصول: RG_110_27D002_000000_14217
- موجودی: 18
-
قیمت پایه : 2,940,000ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 1647
پرسش و پاسخ مشتریان
برچسب ها: ISP SHIELD FOR AVR, شیلد پروگرامر AVR -ISP مخصوص آردوینو UNO, RG_110_000000_000000_14217, ماژول و شیلد های آردوینو