Description:
This a Raspberry Pi Model B+ prototyping shield from Tinysine, You can stack it
on your Raspberry Pi Model B+ easily. which can snap onto the Pi B+ main board
assembly (and is removable later if you wish) and gives you all sorts of
prototyping goodness to make building on top of the Pi B+ super easy.
We added lots of basic but essential goodies. First up, there's a big
prototyping area, half of which is 'breadboard' style and half of which is 'perfboard'
style so you can wire up DIP chips, sensors, and the like. Along the edges of
the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips
so you can easily connect to them. On the edges of the prototyping area, all of
the breakout pins are also connected to labeled 2.5mm screw-terminal blocks.
This makes it easy to semi-permanently wire in sensors, LEDs, etc. There's also
a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
Finally, we had a little space remaining over the metal connectors so we put in
an SOIC surface mount chip breakout area, for those chips that dont come in DIP
format.
Features:
The hole gap is 2.54mm, and it's compatible with IC with DIP package.
The IO port can be quickly and easily implement your ideas.
شیلد پروتوتایپ رزبری پای - ورژن 1.2 - 40pin Prototype Raspberry Pi Expansion Shield
- تولید کننده: China - A
- دسته بندی ها:
- - رزبری (RASPBERRY) و شیلد های آن
- کد محصول: EC_201_22D002_000000_13448
- موجودی: 14
-
قیمت پایه : 3,616,848ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 5776
پرسش و پاسخ مشتریان
برچسب ها: پروتو تایپ, پرو تو تایپ, ماژول, رسپبری پای