STM32 development board designed for STM32F103C series, features the
STM32F103CBT6 MCU, and integrates various standard interfaces, pretty easy for
peripheral expansions.
Overview:
Open103C is an STM32 development board that features an STM32F103CBT6
device as the microcontroller. There are further expansions with various
optional accessory boards for specific application. The modular and open design
makes it the ideal for starting application development with STM32F family.
What's On Board?
STM32F103CBT6:the high performance STM32 MCU which features
Core: ARM Cortex-M3 32-bit RISC
Operating Frequency: 72MHz, 1.25 DMIPS/MHz
Operating Voltage: 2-3.6V
Package: LQFP48
I/Os: 37
Memories: 128kB Flash, 20kB RAM
Communication Interfaces: 2 x SPI, 3 x USART, 2 x I2C, 1 x USB, 1 x CAN
AD & DA converters: 2 x AD (12-bit, 1μs, shares 10 channels)
Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces,
supports IAP
AMS1117-3.3: 3.3V voltage regulator
Power supply switch: 5V DC or USB
Power indicator
LEDs: for indicating I/O status or program debugging running state
Reset button
User key: for I/O input test
Joystick: for I/O input test (five positions)
32.768K crystal
oscillator: used for internal RTC, also supports clock calibration
8M crystal
oscillator: enables the MCU run at 72M frequency by frequency multiplication
8 I/O Interface:
easily connects to keypad, motor, etc.
CAN interface: communicates with accessory board which features the CAN
device conveniently
SPI1 / SPI2 interface
easily connects to SPI peripherals such as FLASH (AT45DBxx), SD card,
MP3, etc.
convenient for connecting AD module, thanks to the SPI1 alternative AD
function
I2C1 / I2C2 interface: easily connects to I2C peripherals such as I/O
expander (PCF8574), EEPROM (AT24Cxx), etc.
LCD interface: easily connects to the touch screen LCD
ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package),
such as temperature sensor (DS18B20), electronic registration number (DS2401),
etc.
USART1 interface: easily connects to RS232, RS485, USB TO 232
USART2 interface: easily connects to RS232, RS485, USB TO 232
USB port: USB communication between board and PC
5V DC jack
5V/3.3 V power
input/output, usually used for power output, or common ground with other user
board
MCU pins connector: all the MCU pins are accessible on expansion
connectors for further expansion
JTAG/SWD interface: for debugging/programming
Boot mode selection: for configuring the BOOT0 and BOOT1 pins
USB enable jumper
short the jumper to enable the PC auto detection while USB connecting
open the jumper to disable
LEDs jumper
short the jumper to connect the LEDs to I/Os used in example code
open the jumper to connect the LEDs to other custom pins via jumper
wires
User key jumper
short the jumper to connect the user key to I/Os used in example code
open the jumper to connect the user key to other custom pins via jumper
wires
Joystick jumper
short the jumper to connect the joystick to I/Os used in example code
open the jumper to connect the joystick to other custom pins via jumper
wires
VBAT selection jumper
short the jumper to use system power supply
open the jumper to connect the VBAT to external power, such as battery
PACKAGE CONTENT:
Open103C development board x 1
PL2303 USB UART Board (mini) x 1
USB type A to Mini-B cable x 1
4-pin wire x 2
2-pin wire x 2
Software CD x 1
بورد توسعه (آموزشی) STM32F103CBT6 Development Board - ساخت WAVESHARE به همراه آداپتور ، مبدل ، کابل و سی دی
- تولید کننده: China - A
- دسته بندی ها:
- - انواع هدر بورد
- کد محصول: NN_201_20B007_000000_13191
- موجودی: 6
-
قیمت پایه : 13,200,000ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 7348
پرسش و پاسخ مشتریان
برچسب ها: بورد توسعه (آموزشی) STM32F103CBT6 Development Board - ساخت WAVESHARE به همراه آداپتور ، مبدل ، کابل و سی دی, NN_201_20B007_000000_13191, انواع هدر بورد