пВї پروگرامر ST-Link V2/ JTAG ویژه بردهای STM8 و STM32 - مدل اورجینال - RG_110_000000_000000_142393 | مجتمع الکترونیک ایران میکرو

فروشگاه به دلیل انبار گردانی از تاریخ 9 تا 17 اردیبهشت تعطیل می باشد . سفارشات ثبت شده از 18 اردیبهشت ارسال خواهند شد . در این مدت پاسخگویی از طریق پیام در واتساپ و ایتا با شماره 09039407345 انجام می شود .


ثبت درخواست واردات قطعات ثبت درخواست تهیه از بازار فرصت شغلی در ایران میکرو مرکز دانلود
  • پروگرامر ST-Link V2/ JTAG ویژه بردهای STM8 و STM32 - مدل اورجینال

Description:
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 2500 VRMS.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Key Features:
5 V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
SWIM specific features
1.65 V to 5.5 V application voltage supported on SWIM interface
SWIM low-speed and high-speed modes supported
SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
JTAG/serial wire debugging (SWD) specific features
1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
JTAG supported
SWD and serial wire viewer (SWV) communication supported
Direct firmware update feature supported (DFU)
Status LED which blinks during communication with the PC
Operating temperature 0 to 50 °C
2500 VRMS high isolation voltage (ST-LINK/V2-ISOL only)
  

نظر بدهید

ورود

پروگرامر ST-Link V2/ JTAG ویژه بردهای STM8 و STM32 - مدل اورجینال

  • قیمت پایه : 11,500,000ریال

  • ارسال رایگان سفارشات بالای 3 میلیون تومان


گزینه های در دسترس



ارزان تر سراغ دارید ؟ اطلاع دهید

تعداد بازدید: 82


پرسش و پاسخ مشتریان



برچسب ها: پروگرامر ST-Link V2/ JTAG ویژه بردهای STM8 و STM32 - مدل اورجینال, RG_110_000000_000000_142393, انواع پروگرامر و دیباگر

'