Features:
1. Single channel USB to serial / parallel ports with a variety of
configurations.
2. Entire USB protocol handled on the chip. No USB specific firmware programming
required.
3. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second)
compatible.
4. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous
serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.
5. UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external
level shifter).
6. USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
7. USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec
8. Supports a proprietary half duplex FT1248 interface with a configurable
width, bi-directional data bus (1, 2, 4 or 8 bits wide).
9. CPU-style FIFO interface mode simplifies CPU interface design.
10. Fast serial interface option.
11. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers
eliminate the requirement for USB driver development in most cases.
12. Adjustable receive buffer timeout.
Typical Applications:
Single chip USB to UART (RS232, RS422 or RS485)
USB to FIFO
USB to FT1248
USB to JTAG
USB to SPI
USB to I2C
USB to Bit-Bang
USB to Fast Serial Interface
USB to CPU target interface (as memory)
ماژول مبدل USB چند منظوره پرسرعت با آی سی FT232H
- تولید کننده: China - A
- دسته بندی ها:
- - ماژول ارتباطی ، شبکه و اینترفیس
- کد محصول: RG_110_16E008_000000_14228
- موجودی: 18
-
قیمت پایه : 4,235,000ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 1598
پرسش و پاسخ مشتریان
برچسب ها: ماژول مبدل USB چند منظوره پرسرعت CJMCU-232H (با آی سی FT232H), RG_110_000000_000000_14228, ماژول ارتباطی ، شبکه و اینترفیس