Description:
FT260 is a HID-class USB to I2C/UART interface device controller with the
following advanced features. The USB Human Interface Device (HID) class is
natively supported by most operation systems.
A custom driver is not required to be installed for the FT260.
Windows 10 32, 64-bit
Windows 8.1 32, 64-bit
Windows 8 32, 64-bit
Windows 7 32, 64-bit
Windows Vista and Vista 64-bit
Windows XP and XP 64-bit
Windows CE 4.2, 5.0, 5.2, 6.0
Windows Server 2008, 2003, 2000
Windows Embedded Operating Systems
For Mac OS X
Linux
Android
Application:
HID class Device controller
USB to HID-over-I2C Bridge
USB to I2C master controller
USB to RS232/RS422/RS485 Converters
Interfacing MCU/PLD/FPGA based designs to USB
USB Instrumentation
Features:
Single chip USB to UART/I2C bridge with standard Human Interface Device (HID)
class support
USB2.0 compliant Full Speed device with entire USB protocol handled on the chip
Support 2 USB HID Interfaces, each corresponding to the on-chip physical
interfaces, I2C and UART
Pin configuration of enabling HID interface for variety of application
HID over I2C specification support
Configurable I2C Master Interface controller conforming to I 2C v2.1 and v3.0
specification
Support 4 speed modes defined in I 2C-bus Specification, standard mode (SM),
fast mode(FM), Fast mode plus (FM+), and High Speed mode (HS)
Robust FTDI UART controller with hardware and software flow control
Data transfer rate from 1.2 Kbuad to 12 Mbaud(RS422, RS485, RS232) at TTL levels
Configurable GPIOs can be easily controlled by software applications under HID
class via the USB bus
Fully integrated oscillator PLL with no external crystal required
On-chip eFUSE for USB Vendor ID (VID), Product ID (PID), and other vendor
specific parameters
Unique USB serial number generation engine and programming path to external
EEPROM
Integrated 5V-3.3V-1.8V level converter for USB I/O
+5V USB VBUS detection engine
USB Power Configurations; supports buspowered, self-powered and bus-powered with
power switching
USB2.0 Low operating and suspend current; 24mA (active-typ) and 385µA
(suspend-typ)
True 3.3V CMOS drive output and TTL input. (operates down to 1V8 with external
pull-ups)
Multiple I/O operating voltage level +3.3V, +2.5V, +1.8V pin output drive
strength; 4 mA(min) and 16 mA(max)
Integrated power-on-reset circuit
USB Battery Charger Detection
UHCI / OHCI / EHCI / XHCI host controller compatible
ماژول مبدل HID USB به I2C / TTL با چیپ FT260 - مدل CJMCU-260
- تولید کننده: China - A
- دسته بندی ها:
- - ماژول ارتباطی ، شبکه و اینترفیس
- کد محصول: RG_110_10F002_000000_14470
- موجودی: 5
-
قیمت پایه : 7,590,000ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 51
پرسش و پاسخ مشتریان
برچسب ها: ماژول مبدل HID USB به I2C / TTL با چیپ FT260 - مدل CJMCU-260, RG_110_000000_000000_14470, ماژول ارتباطی ، شبکه و اینترفیس