Introduction:
A load cell is a transducer that converts force into measurable electrical
output.
This straight bar load cell (sometimes called a strain gauge) can convert
pressure (force) into an electrical signal. Load cells are specially shaped
metal parts that have strain gauges glued to them. The strain gauges are
resistors that change their resistance when they are bent. When the metal part
bends, the resistance of the load cell changes
Load cells generally consist of a spring element on which strain gauges have
been placed. The spring element is usually made of steel or aluminum. That means
it is very sturdy but also minimally elastic. As the name "spring element"
suggests, the steel is slightly deformed under load, but then returns to its
starting position, responding elastically to every load. These extremely small
changes can be acquired with strain gauges. Then finally, the deformation of the
strain gauge is interpreted by analysis electronics to determine the weight.
Each straight bar load cell is made from an Alloy Steel and is capable of
reading capacity up to 50Kg.
Additionally, these load cells offer an IP65 protection rating.
There are many varieties of load cells like Compression/Tension Load Cells,
S-Beam Load Cells, Bending Beam Load Cells, Platform, and Single Point Load
Cells, Canister Load Cells, Low Profile Load Cells, etc.
The method of operation can involve either the use of a weight balancing
mechanism or the detection of the force developed by mechanical levers.
Load cell designs can be distinguished according to the type of output signal
generated (pneumatic, hydraulic, electric) or according to the way they detect
weight. (bending, shear, compression, tension, etc.)
The recommended operating voltage is 5V and it can work maximum at 10V.
Specification:
Model: GML692
Input Voltage: 5V ~ 10V
Usage: Body Scale
Theory: Resistance Sensor
Output Type: Analog
Measuring Range: 50kg (Max)
Comprehensive Error: 0.2% (full Scale)
Precision: 0.2%F.S
Zero balance: 0.3mv/v
Input Impedance: 1000 +/-10ohm
Ultimate overload: 150%F.S
Creep: 0.15%F.S/3min
Operating Temperature: -10°C ~ 40°C
سنسور وزن - لودسل 50 کیلویی - مدل GML692
- تولید کننده: China - A
- دسته بندی ها:
- - سنسور و ماژول خمش ، لرزش ، FSR ، وزن ، لودسل
- کد محصول: RG_110_12F008_000000_14389
- موجودی: 6
-
قیمت پایه : 490,800ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 504
پرسش و پاسخ مشتریان
برچسب ها: سنسور وزن - لودسل 50 کیلویی - مدل GML692, RG_110_000000_000000_14389, سنسور و ماژول خمش ، لرزش ، FSR ، وزن ، لودسل