ESP32-C3 Development Board with Wifi and Bluetooth 5 (LE) Dual USB
Type-C
Features
1.ESP32-C3 is a secure, stable, low-power, low-cost iot chip equipped with
RISC-V32-bit single-core processor, supporting 2.4GHz Wi-Fi and Bluetooth 5
(LE). Provide industry-leading RF performance, complete security mechanism and
rich memory resources for iot products.
2.ESP32-C3's dual support for Wi-Fi and Bluetooth 5 (LE) reduces the difficulty
of device distribution and is suitable for a wide range of iot application
scenarios.
3.ESP32-C3 is equipped with RISC-V 32-bit single-core processor, clock rate up
to 160 MHz. It has 22 programmable GPIO pins and 400 KB built-in SRAM, and
supports multiple external flash interfaces through SPI, Dual SPI, Quad SPI, and
QPI, meeting the functional requirements of various iot products. In addition,
the high temperature resistance of the ESP32-C3 also makes it ideal for lighting
and industrial control.
4. The ESP32-C3 integrates 2.4GHz Wi-Fi and Bluetooth 5 (LE) with long range
support to help build iot devices with greater coverage and RF performance. It
also supports the Bluetooth Mesh protocol and Wi-Fi Mesh, maintaining excellent
RF performance at higher operating temperatures.
5.ESP32-C3 supports secure startup based on RSA-3072 algorithm and flash
encryption based on AES-128-XTS algorithm to ensure secure device connection;
Innovative digital signature module and HMAC module ensure device identity
security; Hardware accelerators that support encryption algorithms ensure that
devices securely transfer data on local networks and in the cloud.
6.ESP32-C3 follows the mature Internet of Things development framework ESP-IDF.
ESP-IDF has successfully enabled hundreds of millions of iot devices and has
gone through rigorous testing and release cycles. Based on its mature software
architecture, familiarity with apis and tools will make it easier for developers
to build or migrate ESP32-C3 applications.
7. The ESP32-C3 also works in slave mode, providing wi-Fi and Bluetooth LE
connectivity to the external host MCU through ESP-AT and ESP-Hosted SDK.
Product Description
This board is assembled with an original ESP32-C3-MINI-1 module from Espressif,
with 4MB Flash(ESP32-C3-MINI-1-N4). It is a general-purpose Wi-Fi + Bluetooth®
LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.
Most of the I/O pins on the module are broken out to the pin headers on both
sides of this board for easy interfacing. Developers can either connect
peripherals with jumper wires or mount the module on a breadboard.
There is a RGB WS2812 LED connected to IO8. It has a Red, Green and Blue LED
that are individually addressable. There are plenty of examples on the internet
showing how to drive a WS2812 LED. For example, Google "WS2812 Arduino" or
"WS2812 c code".
There are two USB C connectors. The one is connected to the USB peripheral of
the ESP32-C3 chip. The second is connected to the ESP32-C3 modules UART via a
CH340 virtual com port.
Specifications
Built-in ESP32-C3FN4 chip, RISC-V 32-bit single-core microprocessor, main
frequency up to 160 MHz
2.4 GHz Wi-Fi: IEEE 802.11 b/g/n-compliant
Bluetooth and Bluetooth LE: Bluetooth 5, Bluetooth mesh
4 MByte(32Mbit) SPI Flash
384 KByte ROM
400 KByte SRAM
PCB Antenna
Dual Type-C USB connectors
Reset and User/Firmware buttons
RGB WS2812 User LED
Power LED
Virtual USB port provided by CH340 for debugging and firmware upgrade
Assembled with ESP32-C3 module
Compact size of 35.6 x 30
Supply Voltage: 5V via USB
Circuit Voltage: 3.0 to 3.6V Circuit Operation
برد توسعه ESP32-C3-Mini-1 With Dual TYPE-C USB Port
- تولید کننده: China - A
- دسته بندی ها:
- - ماژول بلوتوث و وای فای WIFI
- کد محصول: RG_110_000000_000000_14336
- موجودی: 10
-
قیمت پایه : 2,650,000ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 22
پرسش و پاسخ مشتریان
برچسب ها: برد توسعه ESP32-C3-Mini-1 With Dual TYPE-C USB Port, RG_110_000000_000000_14336, ماژول بلوتوث و وای فای WIFI