Arduino KY-032 Obstacle avoidance sensor modules Infrared Obstacle
Avoidance Sensor returns a signal when it detects an object in range. The range
of the sensor is around 2-40 cm distance. It operates at 3.5 to 5 volts at
around 20 milliamps. The Obstacle Avoidance Sensors usually come in two types –
with 3 and 4 pins. This is the 4 pin version Sensor Module and has an optional
Enable pin. An infrared obstacle avoidance sensor is designed to detect
obstacles or the difference in reflective services. This sensor is made with
black and white lines tracing the car ran without a black line on white paper,
available in concrete The yellow complex environment such as the black line
patrol track. As long as the black line around the slightly lighter color than
black can, eliminating the traditional moves so that environmental layout
easier. Frequency adjustment potentiometer is used to adjust the carrier
frequency of the infrared emission tube because the integration receiver 38KHZ
in particular when the carrier frequency is the most sensitive. The 502
resistors clockwise transferred do (that is, the launch tube at maximum
brightness), and then at a white wall tone 103 resistance, has been transferred
to the sensing distance is the farthest so far so that the sensor will work in
the best state
Features of Smart Car Infrared Obstacle Avoidance Sensor Module:
Easy to assemble and use
Onboard detection indication
The effective distance range of 2cm to 40cm
A preset knob to fine-tune distance range
There is an obstacle, the green indicator light on the circuit board.
Anti-jamming capability
Specifications of Smart Car Infrared Obstacle Avoidance Sensor Module:
Model No : IR-08H V02.45.DC
Working voltage: DC 3.3V-5V
Working current: 20mA
Operating temperature: -10°C to 50°C
detection distance:2-40cm
IO Interface: 4-wire interfaces (- / / S / EN)
Output signal: TTL level (low level there is an obstacle, no obstacle high)
Adjustment: adjust multi-turn resistance
Effective angle: 35 °
ماژول فاصله سنج و تشخیص مانع مادون قرمز KY-032 Infrared Obstacle Avoidance Module
- تولید کننده: China - A
- دسته بندی ها:
- - سنسور و ماژول رنگ ، نور ، لیزر ، مادون قرمز IR ، اپتوکانتر و UV
- کد محصول: RG_110_10D010_000000_14519
- موجودی: 47
-
قیمت پایه : 940,500ریال
ارسال رایگان سفارشات بالای 5 میلیون تومان
تعداد بازدید: 1143
پرسش و پاسخ مشتریان
برچسب ها: ماژول سنسور فاصله سنج و تشخیص مانع مادون قرمز KY032, IR-08H, IR08H, Infrared Obstacle Avoidance Module, RG_110_000000_000000_14519, سنسور و ماژول رنگ ، نور ، لیزر ، مادون قرمز IR ، اپتوکانتر و UV