Description:
NRF24L01 2.4Ghz Wireless Transceiver Module is a very low-power module that operates in the global ISM frequency band (2.400Ghz ~ 2.4835Ghz) and has PA amplifiers (Power Amplifier) for transmitting mode and LNA (Low Noise Amplifier) amplification ) is for receiving mode.
To design a wireless system with the NRF24L01 wireless transceiver board, you only need an MCU (microcontroller) and a few other external parts, and you can connect this module to the microcontroller by SPI protocol.
NRF24L01 2.4Ghz Wireless Transceiver Module’s data rate are 250 kbps, 1 Mbps and 2 Mbps and the antenna used in this board is ceramic type.
The order of the module’s Pins is as follows:
VCC – 1.9Vdc ~ 3.6Vdc
GND - Ground
IRQ - Interrupt pin. This pin is active LOW.
MISO - 3.3V-5V tolerant SPI slave output.
MOSI - 3.3V-5V tolerant SPI slave input.
SCK - 3.3V-5V tolerant SPI clock.
CSN - 3.3V-5V tolerant SPI chip select.
CE - 3.3V-5V tolerant chip enable.

Application:
RF wireless Projects
Data loggers
Automation projects

Features:
Pin number: 8 pins
Baud Rate: 250Kbps ~ 2Mbps
Working frequency: 2.4Ghz
Input voltage: 1.9Vdc ~ 3.6Vdc
Communications: SPI
Main chip: NRD24L01
Modulation: GFSK
Antenna: ceramic type
Operating temperature: +85 to -40 degrees Celsius
Pin Pitch: 1.27mm
Size: 27mm x 12mm