رزبری پای 4 - Raspberry Pi 4 B UK- رم 4 گیگ

پریز تایمر دار دیجیتال GAO - مدل 1800 وات

هویه دیمر دار سرامیکی (شیشه ای) - مدل GAOJIE 907

توضیحات
نظرات (0)

مناسب جهت کنترل جهت چرخش موتور های DC با حداکثر جریان 7 آمپر

این محصول بدون ریموت ارائه می شود و می توان از ریموت های لرن کد 433 مگ داخل فروشگاه برای آن استفاده کرد .

Function description and setting method
* Note: All the following working modes need to be implemented with QIACHIP brand remote control (transmitter) and controller (receiver / wireless remote control switch). There is no guarantee that remote controls from other brands will work properly.

Reset function:

Clear all matched remotes. When the data is cleared, all remote control can't make receiver work.

Settings reset:

After pressing the receiver's learning button 8 times, the receiver clears all remote control data in its memory. When the receiver's LED flashes, the reset function is complete.

Description of the three working modes :
Working modes: 1) Momentary; 2) Toggle; 3) Latching.

1) Momentary mode:

After successful pairing in this mode, press and hold the remote control button (such as A), DC motor rotates forward; release the remote control button, the DC motor will turned off; press and hold the remote control button (such as B), DC motor rotates in reverse; release the remote control button, the DC motor will turned off;

2) Toggle mode:

After successful pairing in this mode, press the remote control button (such as A)，DC motor rotates forward; press the remote control button again , the DC motor will turned off ; press the remote control button (such as B) ，DC motor rotates in reverse; press the remote control button again , the DC motor will turned off ;

3) Latching mode:

After successful pairing in this mode, press the remote control button (such as A),DC motor rotates forward ; press the another remote control button (such as B), DC motor rotates in reverse;press the third remote control button(such as C),and the motor turns off.(This mode recommends using a more then three button remote control）

How to set the working mode of the switch controller?
Note: The working mode can only be set when the LED off.

Set Momentary mode :
Step 1) Press the receiver's learning button once.
Wait for the LED on the receiver to light off and enter the setting state.
Step 2) Press the button on the remote control (such as A) once. The LED on the receiver will flash and then turn off.
Step 3) At this time, press another button (such as B) of the same remote control, the indicator flashes and then lights up. The jog mode is set successfully.

Set Toggle Mode:
Step 1) Press the receiver's learning button twice.
Wait for the LED on the receiver to light off and enter the setting state.
Step 2) Press the button on the remote control (such as A) once. The LED on the receiver will flash and then turn off.
Step 3) At this time, press another button (such as B) of the same remote control, the indicator flashes and then lights up. The jog mode is set successfully.

Set Latching Mode:
Step 1) Press the receiver's learning button 3 times.
Wait for the LED on the receiver to light off and enter the setting state.
Step 2) Press the button on the remote control (such as A) once. The LED on the receiver will flash and then turn off.
Step 3) At this time, press another button (such as B) of the same remote control, the indicator flashes and then lights up. The jog mode is set successfully.