Description
The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the internal or external SMPS significantly reduces power consumption in Run mode.
The ST Zio connector, which extends the ARDUINO® Uno V3 connectivity, and the ST morpho headers provide an easy means of expanding the functionality of the Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo-144 board does not require any separate probe as it integrates the ST-LINK debugger/programmer.
The STM32 Nucleo-144 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.

All features
Common features
STM32 microcontroller in an LQFP144, TFBGA225, or VFBGA264 package
3 user LEDs
1 user push-button and 1 reset push-button
32.768 kHz crystal oscillator

Board connectors:
SWD
ST morpho expansion connector
Flexible power-supply options: ST-LINK USB VBUS, USB connector, or external sources
Comprehensive free software libraries and examples available with the STM32Cube MCU Package
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
Features specific to some of the boards (refer to the ordering information section of the data brief for details)
External or internal SMPS to generate Vcore logic supply
Ethernet compliant with IEEE-802.3-2002
USB Device only, USB OTG full speed, or SNK/UFP (full-speed or high-speed mode)
Board connectors:
ARDUINO® Uno V3 connector or ST Zio expansion connector including ARDUINO® Uno V3
Camera module FPC
MIPI20 compatible connector with trace signals
USB with Micro-AB or USB Type-C®
Ethernet RJ45
On-board ST-LINK (STLINK/V2-1, STLINK-V3E, or STLINK-V3EC) debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port