Introduction:
The KY-022 infrared receiver module is a component that reacts to IR light at a
frequency of 38 kHz. This module is usually used to receive commands from IR
remote controllers. Also, this module can be paired with the IR transmitter
module, in addition, it is compatible with embedded boards such as Arduino,
Raspberry Pi.
Specifications:
Voltage: 5 volts DC
Working current: 0.4 to 1.5 mA
Received IR frequency: 38 kHz
Receiving angle: 90°
Receiving range: 18m
Received bandwidth: 100 to 150 Hz
Receive sensitivity: above -18 dB
It has an ambient light filter up to 500 lux
Output type: digital with values 0 and 1 to display the infrared signal
Connection type: three pins (VCC, GND, and OUT) with 2.54 mm standard
Board dimensions: 15 x 18 mm
Weight: 2 grams
Module Pin:
VCC: It is connected to the positive power supply (+5V DC) and provides the
working voltage of the module.
GND: It is connected to the negative power supply (GND or zero volt DC) and is
the negative ground.
OUT: This is the digital output pin of the module that is connected to the
microcontroller or board. The state of this pin changes to 1 when an infrared
signal is received and to 0 when no signal is received.
ماژول گیرنده مادون قرمز IR با گیرنده VS1838 - مدل KY-022
- تولید کننده: China - A
- دسته بندی ها:
- - سنسور و ماژول رنگ ، نور ، لیزر ، مادون قرمز IR ، اپتوکانتر و UV
- کد محصول: RG_110_17D001_000000_14351
- موجودی: 30
-
قیمت پایه : 143,000ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 713
پرسش و پاسخ مشتریان
برچسب ها: ماژول گیرنده مادون قرمز IR با گیرنده VS1838 - مدل KY-022, RG_110_000000_000000_14351, سنسور و ماژول رنگ ، نور ، لیزر ، مادون قرمز IR ، اپتوکانتر و UV