The HM-10 Bluetooth module combines the powerful and programmable
Texas Instruments CC2541 Chipset with the specified components to start out
directly together with your BLE development.The module offers an on-board
voltage regulator and is TTL-level and 5 V tolerant. The Bluetooth-SoC are often
accessed via UART interface and supports AT-Commands for setup. It supports full
Bluetooth 4.0 standard and may be used for your Arduino or microcontroller to
Android or iOS communication projects.This module are often wont to replace
HC-05, HC-06 and HC-07 devices.Thismodule also can be configured and used as an
iBeacon used with Apple devices.
The HM-10 uses the custom characteristic to send and receive the info it
receives over the serial UART interface. It works by setting the worth of the
custom characteristic to the worth of the info to be transmitted. It then sends
out a notification to the remote device to mention there's new data available.
When you tell the the HM-10 to transmit “HELLO”, it first sets the worth of the
custom characteristic to “HELLO” then it sends out a notification telling the
remote device “Hey, I even have new data, come and obtain it.” The remote device
is scanning for the notifications and when it receives one it knows there's a
replacement value, so it reads the info then sends back a message saying
“Thanks, I even have it”.
The custom characteristic can delay to twenty characters, this suggests to send
a string longer than 20 characters the HM-10 splits the info in to twenty
character segments and sends each one in turn until none are left.
HM 10 Bluetooth module use CSR BlueCore or TI CC2540, Master and slave roles in
one, transmission version and remote version and PIO state acquisition functions
in one, Support the AT command modify module parameters, Convenient and
versatile .
Transmission version are often wont to transmit data between two Bluetooth
devices. Remote Control version are often wont to Control PIO ports output high
or low level with none other MCU.
Specification:HM 10 BLE Core Bluetooth Module
BT Version: BT Specification V4.0 BLE
Working frequency: 2.4GHz ISM band
Modulation method: GFSK (Gaussian Frequency Shift Keying)
RF Power: -23dbm, -6dbm, 0dbm, 6dbm
Speed: Asynchronous: 2-6K Bytes, Synchronous: 2-6K Bytes
Security: Authentication and encryption
Service: 0xFFE0 (Modifiable use AT+UUID command)
Characteristic: 0xFFE1 (Modifiable use AT+UUID command)
Characteristic: Notify and Write (Modifiable use AT+UUID command)
Power: +2.5V~3.5VDC 50mA
Power: Active state 8.5mA; Sleep state 50~200uA
ماژول بلوتوث ورژن BLE 4.0 - مدل HM-10S ( دارای چیپ CC2541 - بدون برد راه انداز)
- تولید کننده: China - A
- دسته بندی ها:
- - ماژول بلوتوث و وای فای WIFI
- کد محصول: RG_110_11D009_000000_14357
- موجودی: 5
-
قیمت پایه : 1,699,500ریال
ارسال رایگان سفارشات بالای 3 میلیون تومان
تعداد بازدید: 406
پرسش و پاسخ مشتریان
برچسب ها: HM10, ماژول بلوتوث ورژن BLE 4.0 - مدل HM-10S ( دارای چیپ CC2541 - بدون برد راه انداز), RG_110_000000_000000_14357, ماژول بلوتوث و وای فای WIFI